Double-Leaf (Bi-Parting & Hinged) Cold Room Doors
When clear openings exceed 1800 mm and side wall space cannot accommodate a single wide sliding leaf—or when opening speed must be doubled—bi-parting sliding or double-leaf hinged cold room doors provide the optimal layout.
Fiche Récapitulative Technique
SPC-BD • DOUBLE-LEAF DOORComparatif Technique & Tableau des Dimensions Standards des Portes Frigorifiques
Sélectionnez le modèle de porte frigorifique adapté au flux (piétons, transpalettes, chariots élévateurs ou rail aérien) et à la température de la chambre :
SPC-HD-01
Porte Frigorifique Pivotante (SPC-HD)
Porte frigorifique pivotante avec huisserie PVC ou aluminium anodisé, charnières à rampe et décondamnation intérieure phosphorescente.
- Régime de Température+2/+8°C | -18/-25°C | -35°C
- Épaisseur Vantail68 / 80 / 92 / 100 / 120 / 150 mm
SPC-SD-02
Porte Frigorifique Coulissante (SPC-SD)
Porte frigorifique coulissante grand trafic avec huisserie anti-pont thermique Alu-PVC, levier sans effort et portillon piéton en option.
- Régime de Température+2/+8°C | -18/-25°C | -35/-40°C Şok
- Épaisseur Vantail80 / 100 / 120 / 150 / 200 mm
SPC-BD-03
Porte Frigorifique Double Vantail (SPC-BD)
Portes frigorifiques coulissantes bi-parting et pivotantes à deux vantaux avec ouverture indépendante des vantaux.
- Régime de Température+2/+8°C | -18/-25°C
- Épaisseur Vantail80 / 100 / 120 / 150 mm
SPC-MR-04
Porte Frigorifique avec Passage Monorail (SPC-MR)
Portes pivotantes et coulissantes avec passage de rail aérien isolé pour abattoirs et ateliers de découpe.
- Régime de Température0/+2°C Karkas Ön Soğutma | -18°C Et Muhafaza
- Épaisseur Vantail80 / 100 / 120 mm
SPC-FF-05
Porte Va-et-Vient Flip-Flap (SPC-FF)
Porte va-et-vient 180° simple ou double vantail avec hublot et protection basse en PVC, aluminium ou inox.
- Régime de Température+8/+18°C Hazırlık, Mutfak ve Üretim Koridorları
- Épaisseur Vantail40 mm Poliüretan Dolgulu veya 15 mm PE500 Polietilen
SPC-BR-06
Portes de Bar, Service, Bureau, Hôpital & Usine (SPC-BR)
Portes de service, bureau, laboratoire et usine à simple vantail, double vantail ou vantail pliant, et portes de comptoir.
- Régime de Température+12/+22°C İdari, Hastane, Laboratuvar ve Fabrika Bölmeleri
- Épaisseur Vantail40 mm – 48 mm Poliüretan Dolgulu Kanat (RAL 9002)
SPC-SP-07
Portes Sur Mesure, Issue de Secours, Quai Sectionnel & Rapides (SPC-SP)
Portes d'issue de secours anti-panique, portes coulissantes géantes avec portillon, portes sectionnelles de quai et portes CA.
- Régime de TempératureProjeye Özel (+15°C Rampa -> -40°C Şok Tüneli)
- Épaisseur Vantail42–80 mm Seksiyonel / 80–200 mm Özel Soğuk Kapı
SPC-PVC-300
Polar PVC Strip Curtain System
-40°C sub-zero polar transparent PVC strip curtains with stainless hook-on suspension rails.
- Régime de Température+15°C → -40°C Polar
- Épaisseur Vantail200×2 mm / 300×3 mm
| Code & Modèle | Régime de Température | Épaisseur Vantail | Passages Libres Standards | Réservation Panneau |
|---|---|---|---|---|
| D01 Porte Frigorifique Pivotante (SPC-HD) | +2/+8°C | -18/-25°C | -35°C | 68 / 80 / 92 / 100 / 120 / 150 mm | 750×1800, 800×2000, 900×1900, 900×2000, 1100×1900 mm | Genişlik +70 mm / Yükseklik +40 mm |
| D02 Porte Frigorifique Coulissante (SPC-SD) | +2/+8°C | -18/-25°C | -35/-40°C Şok | 80 / 100 / 120 / 150 / 200 mm | 1200×2100 – 5000×5000 mm (Tek/Personel Geçişli) | Genişlik +80 mm / Yükseklik +40 mm |
| D03 Porte Frigorifique Double Vantail (SPC-BD) | +2/+8°C | -18/-25°C | 80 / 100 / 120 / 150 mm | 1800×2400 – 5000×5000 mm (Çift Kanat) | Genişlik +80 mm / Yükseklik +45 mm |
| D04 Porte Frigorifique avec Passage Monorail (SPC-MR) | 0/+2°C Karkas Ön Soğutma | -18°C Et Muhafaza | 80 / 100 / 120 mm | 1000×2400, 1200×2600, 1400×2800, 1600×3000 mm (+ Ray Yuvası) | Monoray Kanalı En/Boy Şematik Şablonuna Göre Özel Üretim |
| D05 Porte Va-et-Vient Flip-Flap (SPC-FF) | +8/+18°C Hazırlık, Mutfak ve Üretim Koridorları | 40 mm Poliüretan Dolgulu veya 15 mm PE500 Polietilen | 900×2000 (Tek Kanat) / 1400×2100 – 1800×2200 mm (Çift Kanat) | Genişlik +60 mm / Yükseklik +30 mm |
| D06 Portes de Bar, Service, Bureau, Hôpital & Usine (SPC-BR) | +12/+22°C İdari, Hastane, Laboratuvar ve Fabrika Bölmeleri | 40 mm – 48 mm Poliüretan Dolgulu Kanat (RAL 9002) | 800×1100 (Bar) / 800×2000 – 1800×2100 mm (Tek/Çift/Katlanır) | Genişlik +60 mm / Yükseklik +30 mm |
| D07 Portes Sur Mesure, Issue de Secours, Quai Sectionnel & Rapides (SPC-SP) | Projeye Özel (+15°C Rampa -> -40°C Şok Tüneli) | 42–80 mm Seksiyonel / 80–200 mm Özel Soğuk Kapı | 5000×5000 mm'ye kadar fabrika, üzeri yerinde özel üretim | Onaylı İmalat (Shop Drawing) Paftasına Göre |
11 Sous-Modèles de Portes Frigorifiques & de Service (Huisserie PVC / Alu / Portillon)
Sélection détaillée selon le matériau d’huisserie (PVC à rupture thermique vs Aluminium anodisé), cordons chauffants et portillon piéton intégré (Wicket Door) :
| Code Produit (SKU) | Code & Modèle | Application Recommandée |
|---|---|---|
| D01-PVC | Porte Pivotante (Huisserie PVC) | Eşikli/Eşiksiz Pervaz • Alüminyum Kanat Çerçevesi • Isı Köprüsüz PVC Kapı Pervazı • Pozitif (+°C) Rezistanssız / Negatif (-°C) Rezistanslı • RAL 9002 |
| D01-ALU | Porte Pivotante (Huisserie Aluminium) | Eşikli/Eşiksiz Pervaz • Alüminyum Kanat Çerçevesi • Ağır Hizmet Alüminyum Pervaz • Pozitif (+°C) / Negatif (-°C) Rezistanslı • RAL 9002 |
| D03-HC | Porte Frigorifique Pivotante Double Vantail | Ayrı Ayrı Kanat Kullanımı • Özel Kilitleme Sistemi • Alüminyum Kanat & Pervaz • Pozitif (+°C) / Negatif (-°C) Rezistanslı • RAL 9002 |
| D02-SD | Porte Frigorifique Coulissante Simple Vantail | Alüminyum-PVC Birleşik Donma Önleyici Pervaz • Alüminyum Üst ve Alt Ray • Güç Gerektirmeyen Uzun Kol • Pozitif (+°C) / Negatif (-°C) |
| D03-SD | Porte Coulissante Double Vantail (Bi-Parting) | Her İki Yöne Ayrı Ayrı Kullanılma Özelliği • Güç Gerektirmeyen Gömme Kol • Alüminyum-PVC Donma Önleyici Pervaz • 5×5m'ye Kadar Üretim |
| D02-WK | Porte Coulissante avec Portillon Piéton Intégré | Büyük Sürgülü Kapıyı Açmadan Yaya Geçişi • Sürgülü Kanat Üzerine Entegre Menteşeli Çarpma Kapı • Maksimum Enerji Tasarrufu |
| D04-MR | Porte Coulissante et Pivotante avec Passage Monorail | Alüminyum veya Paslanmaz Krom Üst Monoray Taşıyıcı Sistem • Tüm Karkas Et Monoray Hatlarına Uygun Özel Şablon Üretim |
| D06-SRV | Portes de Service, Bureau & Usine (Simple, Double, Pliante) | Tek Kanat / Çift Kanat / Katlanır Kanat • Gözetleme Pencereli veya Penceresiz • Özel Açma Kolu ve Menteşe Sistemi • RAL 9002 |
Liste de Contrôle en 5 Étapes pour Commander une Porte Frigorifique
1. Critères de Commande — Portes Pivotantes
- Sandviç panel veya inşai tip odada kapı için açılan net boşluk ölçüsü (En × Boy)
- Uygulanacak çarpma kapının menteşe yönü (Sağ menteşeli = sağa açılır, kilit solda / Sol menteşeli = sola açılır, kilit sağda)
- Eşikli mi (4 kenar pervaz + 4 kenar conta) yoksa Eşiksiz mi (3 kenar pervaz + alt çift kat süpürgelik contası)?
- Kurulacak odanın çalışma sıcaklığı (+°C pozitif rezistanssız mı, 0°C ve altı negatif 220V rezistanslı mı?)
- Kapının monte edileceği sandviç panel veya duvar kalınlığı (mm)
2. Critères de Commande — Portes Coulissantes
- Sandviç panel veya inşai duvarda açılan net geçiş boşluk ölçüsü (En × Boy)
- Sürgülü kapının kayma (açılış) yönü (Sağa kayar veya Sola kayar; çift kanatta her iki yöne açılım)
- Kapı boşluğundan sonra kapının kayarak açılacağı yan duvarda kalan net park mesafesi
- Kapı boşluğunun kapanacağı karşı yan duvarda kalan net mesafe
- Kapı net boşluğunun üst kotundan tavana / kirişe kadar kalan net alın yüksekliği (üst ray montajı için)
- Oda çalışma derecesi (+°C / -°C) ve monte edileceği panel/duvar kalınlığı
3. Critères Supplémentaires — Portillon & Monorail
- Personel Geçişli Sürgülü Kapılarda: Sürgülü kanat üzerine uygulanacak çarpma kapının net ölçüsü ve açılış yönü
- Monoraylı Kapılarda: Monoray karkas taşıyıcı kanalının en/boy kesit ölçüsü ve kapı üst kotundan geçiş ekseni (şematik şablona göre)
Sliding Door (SPC-SD) 45° Drop-In Seal & Corridor Advantage
In narrow corridors and forklift aisles, sliding doors do not swing into traffic; precision track indentations drop the leaf 45° downward and inward for a 4-sided hermetic seal.
Produits, Systèmes et Pages Techniques Associés
SPC DOOR SYSTEMS
Industrial Cold Room Doors, Freezer Doors & Hygienic Traffic Doors
The doorway is the most critical point for thermal loss, icing, and mechanical wear in any cold store. SerPan Cold engineers 7 specialized door families with thermal-break frames and heavy-duty hardware.
SPC-SD • SLIDING DOOR
Sliding Cold Room Door (SPC-SD Series)
The workhorse of industrial cold storage warehouses and blast freezers. Precision indentations in the overhead anodized aluminium track drop the door leaf 45° downward and inward at the final closing point for a hermetic 4-sided seal.
SPC-SP • CUSTOM DOOR
Custom Cold Store, Loading Dock Sectional & Emergency Exit Doors
For large-scale cold-chain logistics hubs, we engineer and supply the complete door schedule—from insulated loading dock sectional doors and high-speed roll-up doors to panic-bar emergency exits.
SPC-BL • PROTECTION BOLLARDS
Doorway Protection Bollards & Panel Wall Impact Guards
A single forklift strike on a cold door frame compromises thermal sealing. High-visibility steel floor bollards and PE/stainless wall bumper rails armor your facility against impact damage.
Questions Fréquentes sur l'Ingénierie et la Fourniture
Questions techniques fréquentes sur les portes frigorifiques, le choix de l’épaisseur des panneaux, l’étanchéité et les projets clé en main.
C01 What is the difference between "Clear Opening Size" and "Wall Cut-Out Size" when ordering a cold room door?
Clear opening size is the usable internal passage width and height when the door leaf is fully open (e.g., 1200×2100 mm for pallet jacks). Wall cut-out size is the structural opening cut into the panel or masonry wall to receive the door frame, typically +70/+80 mm wider and +40/+50 mm higher depending on the frame profile.
C02 Should I choose a hinged cold room door or a sliding cold room door?
For pedestrian or hand-trolley access up to 1100 mm clear width, a hinged cold room door (D01) is ideal. Whenever pallet jacks or forklifts operate, corridors are narrow, or clear width is 1200 mm and above, a sliding cold room door (D02) should be selected to eliminate leaf sag and save corridor swing space.
C03 Why is a frame heater cable mandatory on freezer (-18°C / -25°C) and blast freezer (-35°C / -40°C) doors?
In sub-zero rooms below 0°C, moisture condenses and freezes around the perimeter gasket. An integrated frame and threshold heater cable prevents the EPDM gasket from freezing onto the aluminium frame, avoiding gasket tearing and door jamming.
C04 How is internal emergency exit safety ensured on cold room doors?
All SerPan Cold hinged and sliding cold room doors feature a standard glow-in-the-dark internal safety release handle (anti-panic mechanism) that unlocks and opens the door from the inside with a single push, even if padlocked or key-locked from outside.
C05 Should I specify a flush threshold (thresholdless) or stepped threshold door?
For any doorway used by pallet jacks, wheeled trolleys, or forklifts, a flush floor (thresholdless) configuration with a drop-seal bottom gasket is mandatory. Stepped stainless steel thresholds are only used for pedestrian-only rooms where floor panels sit above an existing slab.
C06 What technical dimensions are required when ordering a monorail cold room door (D04)?
In addition to clear door width and height, we require the monorail track height from finished floor level, track profile type (tubular or flat/I-beam), centerline offset relative to the door opening, and top slot clearance dimensions.
Sélectionnez Votre Parcours de Devis (4 Voies Techniques)
Sélectionnez le parcours adapté à votre besoin ; vos dimensions et paramètres seront transmis directement à notre bureau d’études sur WhatsApp. (+90 (505) 507 04 18)