Cam-Lock Modular Walk-In Cold Rooms
Installed in 1–2 days directly on any flat floor without civil works, our cam-lock modular walk-in rooms include prefabricated non-slip floor panels and can be disassembled and relocated anytime.
Ficha Técnica Resumida
CAM-LOCK MODULAR ROOMS+4°C Chiller, -20°C Freezer, -40°C Blast Freezer & Modular Cold Rooms
+2°C / +8°C CHILLER ROOMS
Positive Temperature Chiller Cold Rooms (+2°C / +8°C)
Positive temperature (+2/+8°C and 0/+4°C) chiller rooms engineered for fresh meat, dairy, produce, bakery, and pharmaceutical storage.
-18°C / -25°C FREEZER ROOMS
Frozen Storage & Deep Freeze Rooms (-18°C / -25°C)
-18°C to -25°C frozen storage rooms featuring 120–150 mm PIR/PUR panels, heated-frame doors, pressure relief valves, and frost-protected floors.
-35°C / -40°C BLAST FREEZERS
Industrial Blast Freezer Rooms & Tunnels (-35°C / -40°C)
-35°C to -40°C blast freezer rooms and tunnels built with 180–200 mm PIR/PUR panels, heavy-duty heated blast doors, and high-velocity evaporators.
CAM-LOCK MODULAR ROOMS
Cam-Lock Modular Walk-In Cold Rooms
Cam-lock modular walk-in cold rooms with prefabricated floor panels for hotels, restaurants, catering, supermarkets, and laboratories.
Integrated Cold Chain Building, Panel & Door Systems
42 kg/m³ PUR / B-s1,d0 PIR sandwich panels, heavy-duty industrial cold storage doors, and central refrigeration packages manufactured at our Gebze plant.
60–200 MM PUR / PIR PANELS
42 kg/m³ PUR & B-s1,d0 PIR Cold Room Panels
Cam-lock or tongue-and-groove joints with 0.50 mm DX51D+Z pre-painted galvanized steel facings.
SPC DOOR SYSTEMS
Industrial Sliding, Hinged & Monorail Doors
Heated frames, dual-row EPDM gaskets, and heavy-duty anodized aluminum tracks for -40°C blast and freezer rooms.
COLD STORAGE BUILDINGS
Steel-Framed Turnkey Cold Storage Buildings
187 m² to 1,000+ m² bolted structural steel frame, central refrigeration racks, and docked logistics facilities.
Productos, Sistemas y Páginas Técnicas Relacionadas
COLD ROOM SOLUTIONS
Turnkey & Modular Cold Room Solutions
From compact walk-in cold rooms inside existing buildings to multi-chamber industrial storage and blast freezing suites, we engineer the complete package.
+2°C / +8°C CHILLER ROOMS
Positive Temperature Chiller Cold Rooms (+2°C / +8°C)
Preserve product freshness and shelf life with +2/+8°C chiller rooms built using 80–100 mm PUR/PIR panels, hermetic doors, and humidity-balanced unit coolers.
WALL & CEILING PANELS
Cold Room Wall & Ceiling Panels (60 mm – 200 mm)
A cold room's energy consumption is governed by the thermal transmittance (U-value) and vapor tightness of its wall and ceiling panel joints. Our deep labyrinth tongue-and-groove profile eliminates thermal bridges.
FLOOR PANELS & INSULATION
Cold Room Floor Panels & Heavy-Duty Floor Insulation Solutions
Preventing ground heat gain and sub-zero frost heave requires selecting the right floor structure: prefabricated cam-lock floor panels for walk-in rooms, or high-compressive under-slab insulation for forklift warehouses.
Preguntas Frecuentes de Ingeniería y Suministro
Preguntas técnicas frecuentes sobre puertas frigoríficas, selección de espesor de panel, sellado térmico y proyectos llave en mano.
C21 Can refrigeration capacity be calculated based solely on room volume (m³)?
No. Room volume alone only provides a preliminary estimate. Actual cooling load depends on daily product intake tonnage, product entry temperature, specific heat, pull-down time, ambient climate, and door opening frequency.
C22 Is a frozen storage room (-18°C) the same as a blast freezer room (-35°C / -40°C)?
Definitely not. A frozen storage room (-18°C) maintains products that are already frozen. A blast freezer (-35°C / -40°C) uses high-velocity airflow and high refrigeration capacity to rapidly pull down core product temperature to -18°C within hours.
C23 Should we choose individual split condensing units or a central multi-compressor rack system?
For facilities with 1 to 4 rooms or where independent redundancy per room is desired, industrial split units (R01) are cost-effective. For large multi-room logistics hubs and food factories, central multi-compressor racks (R02) offer superior energy efficiency and capacity modulation.
C24 Why is fin spacing critical when selecting cold room unit coolers (evaporators)?
While 4–6 mm fin spacing works for positive (+2/+8°C) chillers, sub-zero freezers (-18°C) require 7–8 mm and blast freezers require 10–12 mm wide fin spacing to prevent rapid frost bridging and airflow blockage.
C25 Why is remote temperature monitoring and alarm data-logging (R04) necessary?
Digital data-logging and mobile alarm panels protect high-value inventory against power outages, open doors, or defrost faults while providing mandatory historical temperature audit trails for food safety and GDP inspections.
C26 Why should an ante-room (precooling / buffer corridor) be included in cold store design?
Opening a -18°C or +2°C chamber directly to +35°C outdoor air causes severe moisture ingress, icy floors, and high power consumption. A temperature-controlled +8/+12°C ante-room acts as a thermal airlock.
Seleccione su Vía de Presupuesto (4 Canales Técnicos)
Seleccione el flujo adecuado a su proyecto; sus medidas y criterios técnicos se enviarán directamente a nuestra Mesa de Ingeniería por WhatsApp. (+90 (505) 507 04 18)